Model WHSR

message
customer support
Tel:209-624-5052
customerservice@allrigging.com

Non-Locking Type

The Model WHSR is an adjustable, horizontal clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontally.  In addition to incorporating two gripping cams, the jaw opening may be adjusted by the positioning of a pin in the body of the clamp.  The gripping cams are spring loaded to remain in the “open” position until the load is applied.  This feature permits the clamp to be easily applied and removed from the load.  Normally furnished with serrated gripping surfaces, it is available with smooth faced bronze or stainless steel surfaces to prevent marring when handling polished plates.

1-308 Model WHSR

Specifications

1-309 Model WHSR

Exploded View

1-310 Model WHSR