Available straight or tapered, flat or with a half twist.
Loose Pin Shackle
Made of strong forged steel.
Available for adjusting length of sling. Can be made the same as end terminals (i.e. half-twist tapered loop, etc.)
Fasten to the sling at the center to protect the sling from wear at this maximum load point. Specify fixed or sliding.
Sliding Chine and Rub Rail Sleeves
Prevent damage to both sling and boat at the chine and rub rails.
Keep sling under water for easier positioning on boat. Keel pad required when lead weights are used.
Fabric-Eye Disconnect & Disconnect Pins
Available for slings 8” wide and larger.