- Meets performance requirements of Grade 6 shackles.
- Forged, Quenched & Tempered, with alloy pins.
- Working Load Limit and Grade 6 permanently shown on every shackle.
- Hot-dip galvanized (G) or self colored (S).
- Sizes 3/8 inch and below are mechanically galvanized.
- Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
- Shackles can be furnished proof tested with certificates to designated
standards, such as ABS, DNV, Lloyds, or other certifications. Proof testing and certification available when requested at the time of order, charges will apply. - Approved for use at -40° F (-40° C) to 400° F (204° C).
- All 209 and 210 shackles can meet charpy requirements of 31 ft-lb (42
Joules) avg. at -4° F (-20° C) upon special request. - Meets or exceeds all requirements of ASME B30.26.
- Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
- G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C271H, Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
• Look for the Red Pin®… the mark of genuine Crosby quality.
OUR AFFILIATES
We are proud to work alongside some of the world's most prominent industry leaders in our field!
We Provide Wire Rope, Chain, Synthetic Slings, Cargo Control, Hardware, Fall Protection, and various other types of equipment for the utility, Marine, and construction industries. ARC is a factory authorized repair center for IKAR/Ultra Safe retractable lifelines and renfroe clamps. In addition, we offer inspection and proof testing services.
